logo canson
logo canson

Tutos, conseils artistiques et activités pour enfants

Wood engraving: markers for engraving a second wood block

Twitter icon

Notez cet article

Author : Julia Chausson

 

Good to know: 

With wood engraving, it is necessary to engrave a wood block for each colour, which restricts the artist to a limited number of colours. But this constraint is also an advantage: it means the artist must simplify the drawing and compose the image differently

 

 

Photographie : La profondeur de champ (PDC)

1. Placing markers

 

Once the first block is engraved, place markers for engraving the second wood block. Use a wood block that has the same format as the first one.

Ink the first engraved wood block and print it on a draft paper. Accurately set the blank wood block on the freshly printed sheet.

Turn over and rub the paper using the back of a small spoon or a Japanese baren. This process enables you to transfer the image from the first block onto the second.

 

 

Photographie : La profondeur de champ (PDC)

2. Placing the second colour

 

A vous de déterminer où vous souhaitez placer la seconde couleur.

Decide where you want to place the second colour.

For this coastal landscape, I used this second block to colour the expanse of water, create white spaces, and highlight the shrubs in the foreground, the boats and the reflections on the water.

 

 

 

Tip: To place the second colour, you can use charcoal to draw directly on the second wood block. But remember to fix it with a fixative. Then engrave around your charcoal drawing.

Produits conseillés

Canson® Barbizon


A lire aussi